The right access point today is chosen not by the maximum "speed on the box", but by a set of quite mundane parameters: how many bands are actually used, is there 6GHz, how many spatial streams does the radio frequency give, which uplink is on the wired side, is PoE supported, is there a second Ethernet port, can the device works as a bridge, whether it supports mesh, how exactly it can be controlled and in which case it is made. This is especially important for Zyxel, because the Wi‑ ...

The Zyxel IAP500BE is a Wi‑Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore. The Zyxel IAP500BE is a Wi-Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore. ...

If your company uses Zabbix for infrastructure monitoring, you can integrate Keenetic routers and access points into this platform by following our instructions. This greatly facilitates network maintenance and incident investigation. In all cases when I came across the use of Keenetic in business, none of the owners set up means of active monitoring of these devices, even if there were two or three dozen access points. There can be many reasons for this, ranging from banal laziness and lack ...

This is a Wi-Fi 7 model with a simplified radio part with a 2x2:2 antenna formula and a channel width of up to 240 MHz, which gives an overall air speed of up to 5.1 Gbit/s. With a 2.5-gigabit network port, the access point can easily handle such complex tasks as backup of client laptops, synchronization of media archives, streaming video in any resolution, and in general, everything that requires the transmission of large amounts of data "over the air" is not very demanding of delays ...

... point-to-client scenario. The access point has two 2.5 Gbit ... appearance of the WBE530 Zyxel access point immediately catches the eye – its ... each other without turning the access point into a bulky monster. The ... Secureporter facilitates corporate network security monitoring ... and once again, let's ... of the administrator for each access point and each frequency range used ... in the settings of each access point. At Zyxel, it is convenient ... be used along with traditional Wi-Fi 6 bands is a property that ...

The NWA210BE model is a model of the Wi-Fi 7 standard in the medium price range, it has 2 radio modules with formulas 2x2:2 for 2.4GHz and 4x4:4 for 5 and 6 GHz. The 5 and 6 Hz ranges are controlled by a single BandFlex radio module, so only one of them can operate at a time. The NWA210BE supports a channel width of 320 MHz, which allows for high point-to-point speeds, which may be in demand when building wireless bridges or connecting high-resolution NVR cameras. The new Wi-Fi 7 standard ...

In this article, we will look at 5 software services that you can install through Docker to facilitate the maintenance of your servers. This software stack is a Must Have for a small infrastructure using Docker (Swarm). In this article, we will look at 5 software services that you can install through Docker to facilitate the maintenance of your servers. This software stack is a Must Have for a small infrastructure using Docker (Swarm). 1. Watchtower This software package automatically ...

Does beamforming technology replace expensive Smart antennas with switchable diagram or adaptive array? Let's answer this question by testing various Zyxel Wi-Fi 6 access points. How does Beamforming work in general Beamforming technology is the most frequently used function in the new generation of intelligent antennas at Wi-Fi access points 6. The essence of Beamforming technology is that an array of antennas is used to “control” or transmit radio signals in a certain direction, and not ...

If you choose an access point for rooms with high traffic, for example, for restaurants, halls of business centers or for conference halls, then you most likely need a model with Wi-Fi 6 support and a total bandwidth above 2Gbps. As a rule, such devices have a price of about $1000, and their characteristics exceed the requirements of a typical customer. If you choose an access point for rooms with high traffic, for example, for restaurants, halls of business centers or for conference halls, ...

Let's consider a typical case: a large retail chain opens hundreds of new stores, each of which plans to use IoT infrastructure using Wi-Fi 6. In order to facilitate the setup and commissioning of equipment, in other words, so that the sysadmin does not hang around all 100 stores, you can turn the deployment process upside down: first set up the network, and then lay the cables and mount the devices. Today ZyXEL provides you with such an opportunity when using the Nebula service. Let's ...