title=

The model range of Zyxel Wi-Fi 7 access points

The right access point today is chosen not by the maximum "speed on the box", but by a set of quite mundane parameters: how many bands are actually used, is there 6GHz, how many spatial streams does the radio frequency give, which uplink is on the wired side, is PoE supported, is there a second Ethernet port, can the device works as a bridge, whether it supports mesh, how exactly it can be controlled and in which case it is made. This is especially important for Zyxel, because the Wi‑ ...
 title=

Review of the Zyxel IAP500BE Secure Access Point

The Zyxel IAP500BE is a Wi‑Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore. The Zyxel IAP500BE is a Wi-Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore. ...
 title=

Configuring Zabbix for monitoring access points and Keenetic routers

If your company uses Zabbix for infrastructure monitoring, you can integrate Keenetic routers and access points into this platform by following our instructions. This greatly facilitates network maintenance and incident investigation. In all cases when I came across the use of Keenetic in business, none of the owners set up means of active monitoring of these devices, even if there were two or three dozen access points. There can be many reasons for this, ranging from banal laziness and lack ...
 title=

Setting up Tailscale on the Zyxel USG Flex 500H gateway

Tailscale can now be centrally deployed on the security gateway. We'll tell you how to deploy Tailscale and Headscale on the Zyxel USG Flex500, cross internal networks, organize an exit node, and use unique features, from publishing local services to mesh routing via NAT and firewall. Medium-sized offices and home labs require a flexible solution that allows users to securely connect to a corporate or private network from anywhere in the world. One of the most convenient tools for this is ...
 title=

Zyxel NWA50BE Review - Inexpensive 2.5G PoE model for Wi-Fi 7

This is a Wi-Fi 7 model with a simplified radio part with a 2x2:2 antenna formula and a channel width of up to 240 MHz, which gives an overall air speed of up to 5.1 Gbit/s. With a 2.5-gigabit network port, the access point can easily handle such complex tasks as backup of client laptops, synchronization of media archives, streaming video in any resolution, and in general, everything that requires the transmission of large amounts of data "over the air" is not very demanding of delays ...
 title=

Zyxel WBE530 review: access point with 3 radio modules

The total bandwidth of the ZyXEL WBE530 is 10.8 GBps, but it is clear that it is achieved in ideal conditions when some customers "do not enter the wire", but exchange traffic via Wi-Fi. The access point has two 2.5 Gbit/s network interfaces, PoE power supply with up to 21 watts and 3 radio modules with 6 streams (2x2 for 2.4 GHz, 2x2 for 5 GHz and 2x2 for 6 GHz bands), channel widths of 160 and 320 MHz for 5 and 6 GHz bands are supported.> We continue to get acquainted with the ...
 title=

Review of the Zyxel NWA210BE Access Point: Wi-Fi 7 model for high density spaces

The NWA210BE model is a model of the Wi-Fi 7 standard in the medium price range, it has 2 radio modules with formulas 2x2:2 for 2.4GHz and 4x4:4 for 5 and 6 GHz. The 5 and 6 Hz ranges are controlled by a single BandFlex radio module, so only one of them can operate at a time. The NWA210BE supports a channel width of 320 MHz, which allows for high point-to-point speeds, which may be in demand when building wireless bridges or connecting high-resolution NVR cameras. The new Wi-Fi 7 standard ...
 title=

Testing smart antenna and beamforming at Zyxel Wi-Fi 6 access points

Does beamforming technology replace expensive Smart antennas with switchable diagram or adaptive array? Let's answer this question by testing various Zyxel Wi-Fi 6 access points. How does Beamforming work in general Beamforming technology is the most frequently used function in the new generation of intelligent antennas at Wi-Fi access points 6. The essence of Beamforming technology is that an array of antennas is used to “control” or transmit radio signals in a certain direction, and not ...
 title=

Review of the Zyxel WAX630S access point and the XGS1250-12 switch: an inexpensive tandem for Wi-Fi 6 and a multi-gigabit LAN

... customer. If you choose an access point for rooms with high traffic ... -in Bluetooth and a direct VPN connection to the headquarters. If ... are maximal. In the WAX630S access point, the antenna design looks like ... , for example, a computer, another access point or a surveillance camera. Mains ... /access layer between desktop PCs, Wi-Fi 6 wireless environment and office server ... Control Center The Zyxel WAX630S access point can be configured both via ... to a single network via VPN ( see our article ), and also ...
 title=

Quick setup of a wireless network via Zyxel Nebula when deployed in branches

... to use IoT infrastructure using Wi-Fi 6. In order to facilitate ... to use IoT infrastructure using Wi-Fi 6. In order to facilitate ... article about  setting up various VPN scenarios  via Nebula. One of ... a company plans to deploy Wi-Fi 6 infrastructure at peripheral facilities. Ideally ... modes simultaneously to the same access point. As a result, some ... the simplest access points with Wi-Fi 6 support, PoE and cloud management ... loading, PoE device power consumption, access point and wireless network loading, as ...