The right access point today is chosen not by the maximum "speed on the box", but by a set of quite mundane parameters: how many bands are actually used, is there 6GHz, how many spatial streams does the radio frequency give, which uplink is on the wired side, is PoE supported, is there a second Ethernet port, can the device works as a bridge, whether it supports mesh, how exactly it can be controlled and in which case it is made. This is especially important for Zyxel, because the Wi‑ ...

The Zyxel IAP500BE is a Wi‑Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore. The Zyxel IAP500BE is a Wi-Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore. ...

If your company uses Zabbix for infrastructure monitoring, you can integrate Keenetic routers and access points into this platform by following our instructions. This greatly facilitates network maintenance and incident investigation. In all cases when I came across the use of Keenetic in business, none of the owners set up means of active monitoring of these devices, even if there were two or three dozen access points. There can be many reasons for this, ranging from banal laziness and lack ...

This is a Wi-Fi 7 model with a simplified radio part with a 2x2:2 antenna formula and a channel width of up to 240 MHz, which gives an overall air speed of up to 5.1 Gbit/s. With a 2.5-gigabit network port, the access point can easily handle such complex tasks as backup of client laptops, synchronization of media archives, streaming video in any resolution, and in general, everything that requires the transmission of large amounts of data "over the air" is not very demanding of delays ...

The total bandwidth of the ZyXEL WBE530 is 10.8 GBps, but it is clear that it is achieved in ideal conditions when some customers "do not enter the wire", but exchange traffic via Wi-Fi. The access point has two 2.5 Gbit/s network interfaces, PoE power supply with up to 21 watts and 3 radio modules with 6 streams (2x2 for 2.4 GHz, 2x2 for 5 GHz and 2x2 for 6 GHz bands), channel widths of 160 and 320 MHz for 5 and 6 GHz bands are supported.> We continue to get acquainted with the ...

The NWA210BE model is a model of the Wi-Fi 7 standard in the medium price range, it has 2 radio modules with formulas 2x2:2 for 2.4GHz and 4x4:4 for 5 and 6 GHz. The 5 and 6 Hz ranges are controlled by a single BandFlex radio module, so only one of them can operate at a time. The NWA210BE supports a channel width of 320 MHz, which allows for high point-to-point speeds, which may be in demand when building wireless bridges or connecting high-resolution NVR cameras. The new Wi-Fi 7 standard ...

This is a 28-port switch, in which 4 ports are gigabit optics for Uplink, and the remaining 24 ports are 1-gigabit RJ45 PoE with a total power budget of 370 watts, and each of these ports can work both in 802.3af mode (up to 15.4 watts) and and in the mode 802.at (up to 30 watts). When integrating into the project, some features of this switch should be taken into account. Level 3 switches with PoE support are usually used to build enterprise Wi-Fi networks and video surveillance systems. And ...

Zyxel reasoned this way: if the L3 functionality is already determined only by the firmware, 99% choose an access switch for the sake of port density, PoE, VLAN, Multicast, and less often for static routing, then here's the base model XMG1930, which is generally L2, but slightly L3. And if your network requires advanced L3 functions, then all this is also there, just buy the appropriate license and get the core-level functionality. You can do this at any time, even when buying a device, even ...

This L3 layer switch has 4 x 10-Gigabit SFP+ slots, 1-Gigabit PoE+ ports for the main fleet of devices, NVR/VoIP optimized interface, support for Nebula cloud service and multi-Gigabit PoE+ ports for Wi-Fi 6 access points. That is, Zyxel has added a maximum of functions to make it the most versatile. In the Zyxel hierarchy, the XGS2220 series refers to access switches, that is, to the lowest level that serves end devices and access points. We are used to the fact that cheap maintenance-free ...

In this article, we will look at 5 software services that you can install through Docker to facilitate the maintenance of your servers. This software stack is a Must Have for a small infrastructure using Docker (Swarm). In this article, we will look at 5 software services that you can install through Docker to facilitate the maintenance of your servers. This software stack is a Must Have for a small infrastructure using Docker (Swarm). 1. Watchtower This software package automatically ...