The model range of Zyxel switches
Choosing a Zyxel switch rarely boils down to a simple "how many ports do I need?"&"- GS1100 and GS1900 from the same price category can radically differ in control functionality, and externally similar XGS1935 and XGS2220 will differ in routing and stacking class so much that they solve completely different infrastructure tasks. In this review, we will analyze the product line into three practical groups - SOHO and small office, medium and large business, as well as industrial and ...
The model range of Zyxel Wi-Fi 7 access points
The right access point today is chosen not by the maximum "speed on the box", but by a set of quite mundane parameters: how many bands are actually used, is there 6GHz, how many spatial streams does the radio frequency give, which uplink is on the wired side, is PoE supported, is there a second Ethernet port, can the device works as a bridge, whether it supports mesh, how exactly it can be controlled and in which case it is made. This is especially important for Zyxel, because the Wi‑ ...
Review of the Zyxel IAP500BE Secure Access Point
... , meaning a powerful modern PoE switch or injector will be required ... speed as in how Zyxel approached the device itself ... boundaries of positioning: the Zyxel IAP500BE does not look like ... up to +65 °C, Zyxel considers the passive circuit sufficient ... internal design of the Zyxel IAP500BE is made in ... deserves special mention. Here, Zyxel uses the entire familiar 802 ... access points that may pose security risks or interfere with the ... constant overload.
Conclusions
The Zyxel IAP500BE leaves a very solid ...
Zyxel CX4800-56f review: 100G Switch with high redundancy
The Zyxel CX4800-56F is a high-density L3 aggregation optical switch in which the company pioneered the use of 100G ports: 8 QSFP28 100GbE uplinks complement 48 SFP+/SFP28 slots with 10/25gbe support, forming a single 56-port stack for traffic aggregation in campus and data centers factories. With a pass-through switching matrix of up to 4 Tbit/s and forwarding speeds of up to 2 billion packets per second, this switch confidently closes scenarios of highly loaded highways, where not only ...
Zyxel NWA50BE Review - Inexpensive 2.5G PoE model for Wi-Fi 7
This is a Wi-Fi 7 model with a simplified radio part with a 2x2:2 antenna formula and a channel width of up to 240 MHz, which gives an overall air speed of up to 5.1 Gbit/s. With a 2.5-gigabit network port, the access point can easily handle such complex tasks as backup of client laptops, synchronization of media archives, streaming video in any resolution, and in general, everything that requires the transmission of large amounts of data "over the air" is not very demanding of delays ...
How to set up seamless roaming on Zyxel access points via Nebula Control Center
... and support for the WPA3 security standard became mandatory. Both ... 802.11r, and they switch between access points when ... specifically enabled due to increased security requirements, as this standard ... uses a built-in more secure fast roaming mechanism, which ... navigate between access points more securely, but with some limitations ... next thing I would pay attention to is the ... we used the
Zyxel NWA210BE
and
Zyxel WBE530
access points connected ... importantly, this The network status is configured in just 2 ...
Review of the Zyxel NWA210BE Access Point: Wi-Fi 7 model for high density spaces
... Gbps, one of which is PoE, and what is especially interesting ... access point has protection against static voltage from the port, and ... not be there if the switch is very cheap or it ... will also be protected from static.
Looking at the location of ... all the settings, we will pay attention only to the most ... and shaping
How Zyxel Secureporter facilitates corporate network security monitoring
... and ... are not yet ready to pay for the WoW factor.
Among ... Web interface, which was clearly stuck in the last decade, in ...
Using the features of dynamic VLAN and authentication on Zyxel switches
Following the recommendations of "best practice", network devices of various purposes, such as IoT, work computers, smartphones, guest devices, should always be located in different subnets, and ideally terminated through a common security gateway, however, in some cases, for example, when the gateway does not cope with the flow of traffic, distribution by subnets it can be assigned to a network switch to separate different devices by VLANs, thus separating access to different networks ...
Protecting the company's network with Zyxel USG Flex 100AX
... , it is possible to switch the Zyxel USG Flex 100AX to Wi ... the global Internet).
Zyxel has a very interesting Secure Wi-Fi feature ... pay for licenses.
Design features of the Zyxel USG Flex 100AX
The security ... to do it on Zyxel.
Web surfing Security
The logic of restrictions ... I said, the Zyxel USG Flex 100AX security gateway uses two types ... the rest of the network stack directly, including monitoring using Zabbix ... that.
In terms of security, yes, the Zyxel USG Flex 100 is ...
Exploring the features of the Zyxel XMG1915-18EP, a 2.5-Gigabit PoE switch with a basic L3
We have a rather interesting class of L3 switches in front of us: multi-gigabit PoE models with a relatively small number of ports, an average PoE budget by modern standards, but 10-gigabit uplinks. They are interesting because the manufacturer has placed 2.5G PoE + 10G in a compact 9-inch rack housing with a silent fan, and such a switch can be installed at home, in a 1-room office, under a false ceiling or in narrow telecommunication cabinets.
We have a rather interesting class of L3 ...
