The model range of Zyxel Wi-Fi 7 access points
The right access point today is chosen not by the maximum "speed on the box", but by a set of quite mundane parameters: how many bands are actually used, is there 6GHz, how many spatial streams does the radio frequency give, which uplink is on the wired side, is PoE supported, is there a second Ethernet port, can the device works as a bridge, whether it supports mesh, how exactly it can be controlled and in which case it is made. This is especially important for Zyxel, because the Wi‑ ...
Review of the Zyxel IAP500BE Secure Access Point
The Zyxel IAP500BE is a Wi‑Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore.
The Zyxel IAP500BE is a Wi-Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore.
...
Configuring Zabbix for monitoring access points and Keenetic routers
If your company uses Zabbix for infrastructure monitoring, you can integrate Keenetic routers and access points into this platform by following our instructions. This greatly facilitates network maintenance and incident investigation.
In all cases when I came across the use of Keenetic in business, none of the owners set up means of active monitoring of these devices, even if there were two or three dozen access points. There can be many reasons for this, ranging from banal laziness and lack ...
Zyxel NWA50BE Review - Inexpensive 2.5G PoE model for Wi-Fi 7
This is a Wi-Fi 7 model with a simplified radio part with a 2x2:2 antenna formula and a channel width of up to 240 MHz, which gives an overall air speed of up to 5.1 Gbit/s. With a 2.5-gigabit network port, the access point can easily handle such complex tasks as backup of client laptops, synchronization of media archives, streaming video in any resolution, and in general, everything that requires the transmission of large amounts of data "over the air" is not very demanding of delays ...
Zyxel WBE530 review: access point with 3 radio modules
The total bandwidth of the ZyXEL WBE530 is 10.8 GBps, but it is clear that it is achieved in ideal conditions when some customers "do not enter the wire", but exchange traffic via Wi-Fi. The access point has two 2.5 Gbit/s network interfaces, PoE power supply with up to 21 watts and 3 radio modules with 6 streams (2x2 for 2.4 GHz, 2x2 for 5 GHz and 2x2 for 6 GHz bands), channel widths of 160 and 320 MHz for 5 and 6 GHz bands are supported.>
We continue to get acquainted with the ...
Review of the Zyxel NWA210BE Access Point: Wi-Fi 7 model for high density spaces
The NWA210BE model is a model of the Wi-Fi 7 standard in the medium price range, it has 2 radio modules with formulas 2x2:2 for 2.4GHz and 4x4:4 for 5 and 6 GHz. The 5 and 6 Hz ranges are controlled by a single BandFlex radio module, so only one of them can operate at a time. The NWA210BE supports a channel width of 320 MHz, which allows for high point-to-point speeds, which may be in demand when building wireless bridges or connecting high-resolution NVR cameras.
The new Wi-Fi 7 standard ...
Managed PDU: do you really need it?
PDUs with remote disconnection of sockets and groups of sockets, which are often called switchable PDUs, provide remote control of sockets and groups of sockets, allowing operators to quickly overload hung devices, block their activation, turn off excess power at peak loads and balance the load between phases in 3-phase networks by monitoring and disconnecting sockets.
PDU (Power Distribution Unit), they are also power distributors, or power distributors, sometimes socket blocks, but this is ...
Server rack monitoring: what is needed for this
Technologies are so advanced today that there are many tools for monitoring server racks and the entire computing infrastructure of a small enterprise. These systems also allow you to optimize energy use, manage backup power and control cooling.
A server rack is a miniature ecosystem with its own climate, its own electrical part, as well as its own security and protection facilities. But how to ensure the proper functioning of the rack and early troubleshooting? The solution is monitoring ...
Guide to the server power supplies
The power supply is a critical component of the server, on which not only the stability of operation depends, but also the operating costs. What types of server PSUs are used today and how to choose a power model.
Server power supplies, which are used to provide power to server components, have various parameters, such as power, current, and voltage. Depending on the type of server enclosure and its capacity, power supplies are divided into different categories.
Conventional ATX power ...
5 free services for your docker server
In this article, we will look at 5 software services that you can install through Docker to facilitate the maintenance of your servers. This software stack is a Must Have for a small infrastructure using Docker (Swarm).
In this article, we will look at 5 software services that you can install through Docker to facilitate the maintenance of your servers. This software stack is a Must Have for a small infrastructure using Docker (Swarm).
1. Watchtower
This software package automatically ...
