title=

The model range of Zyxel switches

Choosing a Zyxel switch rarely boils down to ... That is why choosing a Zyxel switch rarely comes down to a ... small-office network without purchasing a managed switch. The next stage is ... , network wounded and other NETWORKS for employees. At this stage, ... towards a more responsible access network. The line includes both ... node connectivity If the network is built around conventional ... video streams on top of 10GbE without delay. Redundancy via ... injectors. ** - PoE12-60W supports 10Gbe only over CAT6A or higher ...
 title=

The model range of Zyxel Wi-Fi 7 access points

... but also a more coherent network architecture for the future. In ... ports are another, and 10GbE or 10GbE/SFP+ take the device ... models rely on a single network port, which immediately affects ... compact spaces where a wireless network is needed quickly and ... network is already being designed rather than simply installed The Zyxel ... need to install a separate switch on the ceiling for ... important. However, if the network needs to be extended through ... a more efficient and reliable network setup. As the client ...
 title=

Review of the Zyxel IAP500BE Secure Access Point

The Zyxel IAP500BE is a Wi‑Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore. The Zyxel IAP500BE is a Wi-Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore. ...
 title=

Zyxel CX4800-56f review: 100G Switch with high redundancy

The Zyxel CX4800-56F is a high-density L3 aggregation optical switch in which the company pioneered the use of 100G ports: 8 QSFP28 100GbE uplinks complement 48 SFP+/SFP28 slots with 10/25gbe support, forming a single 56-port stack for traffic aggregation in campus and data centers factories. With a pass-through switching matrix of up to 4 Tbit/s and forwarding speeds of up to 2 billion packets per second, this switch confidently closes scenarios of highly loaded highways, where not only ...
 title=

Zyxel NWA50BE Review - Inexpensive 2.5G PoE model for Wi-Fi 7

This is a Wi-Fi 7 model with a simplified radio part with a 2x2:2 antenna formula and a channel width of up to 240 MHz, which gives an overall air speed of up to 5.1 Gbit/s. With a 2.5-gigabit network port, the access point can easily handle such complex tasks as backup of client laptops, synchronization of media archives, streaming video in any resolution, and in general, everything that requires the transmission of large amounts of data "over the air" is not very demanding of delays ...
 title=

How to set up seamless roaming on Zyxel access points via Nebula Control Center

In modern wireless networks, access points interact with each other by exchanging clients to balance the load and switch the mobile subscriber to a station with a higher signal strength. To ensure that the process of switching between access points remains unnoticeable for the client and does not lead to a pause or interruption of the call through the messenger, the 802.11k and 802.11r protocols are used, which are responsible for switching between wireless stations and maintaining ...
 title=

Review of the Zyxel NWA210BE Access Point: Wi-Fi 7 model for high density spaces

The NWA210BE model is a model of the Wi-Fi 7 standard in the medium price range, it has 2 radio modules with formulas 2x2:2 for 2.4GHz and 4x4:4 for 5 and 6 GHz. The 5 and 6 Hz ranges are controlled by a single BandFlex radio module, so only one of them can operate at a time. The NWA210BE supports a channel width of 320 MHz, which allows for high point-to-point speeds, which may be in demand when building wireless bridges or connecting high-resolution NVR cameras. The new Wi-Fi 7 standard ...
 title=

Using the features of dynamic VLAN and authentication on Zyxel switches

Following the recommendations of "best practice", network devices of various purposes, such as IoT, work computers, smartphones, guest devices, should always be located in different subnets, and ideally terminated through a common security gateway, however, in some cases, for example, when the gateway does not cope with the flow of traffic, distribution by subnets it can be assigned to a network switch to separate different devices by VLANs, thus separating access to different networks ...
 title=

Protecting the company's network with Zyxel USG Flex 100AX

Zyxel USG Flex 100AX is an entry–level security gateway that is designed for installation in small offices and branches, in cases where the company has strict security requirements or there is a complex multi-rank network in which it would be nice to restrict employee access to various social networks and unnecessary resources and have an additional line of protection of the network perimeter. Zyxel USG Flex 100AX is an entry–level security gateway that is designed for installation in small ...
 title=

Exploring the features of the Zyxel XMG1915-18EP, a 2.5-Gigabit PoE switch with a basic L3

We have a rather interesting class of L3 switches in front of us: multi-gigabit PoE models with a relatively small number of ports, an average PoE budget by modern standards, but 10-gigabit uplinks. They are interesting because the manufacturer has placed 2.5G PoE + 10G in a compact 9-inch rack housing with a silent fan, and such a switch can be installed at home, in a 1-room office, under a false ceiling or in narrow telecommunication cabinets. We have a rather interesting class of L3 ...