Zyxel CX4800-56f review: 100G Switch with high redundancy
The Zyxel CX4800-56F is a high-density L3 aggregation optical switch in which the company pioneered the use of 100G ports: 8 QSFP28 100GbE uplinks complement 48 SFP+/SFP28 slots with 10/25gbe support, forming a single 56-port stack for traffic aggregation in campus and data centers factories. With a pass-through switching matrix of up to 4 Tbit/s and forwarding speeds of up to 2 billion packets per second, this switch confidently closes scenarios of highly loaded highways, where not only ...
Configuring Zabbix for monitoring access points and Keenetic routers
If your company uses Zabbix for infrastructure monitoring, you can integrate Keenetic routers and access points into this platform by following our instructions. This greatly facilitates network maintenance and incident investigation.
In all cases when I came across the use of Keenetic in business, none of the owners set up means of active monitoring of these devices, even if there were two or three dozen access points. There can be many reasons for this, ranging from banal laziness and lack ...
Setting up Tailscale on the Zyxel USG Flex 500H gateway
... the announced subnets.
At this stage, we can already talk about ... fledged VPN router. This is useful if you need to provide secure Internet ... for the entire VPN session, while maintaining routing and security controls on ... inside the VPN, without leaving the secure channel. This increases security, as DNS ... redirected through an additional router or VPN. This is convenient when ...
You can check the Funnel status with the command:
tailscale funnel ... status
If you need to completely ...
Exploring the features of the Zyxel XMG1915-18EP, a 2.5-Gigabit PoE switch with a basic L3
We have a rather interesting class of L3 switches in front of us: multi-gigabit PoE models with a relatively small number of ports, an average PoE budget by modern standards, but 10-gigabit uplinks. They are interesting because the manufacturer has placed 2.5G PoE + 10G in a compact 9-inch rack housing with a silent fan, and such a switch can be installed at home, in a 1-room office, under a false ceiling or in narrow telecommunication cabinets.
We have a rather interesting class of L3 ...
The differences between expensive Ethernet switches and cheap ones using the example of Zyxel
We will take two switches: the Taiwanese brand Zyxel and the Chinese counterpart from a little-known manufacturer and look at the design differences and what they affect in order to answer the question - does it make sense to overpay for design features?
It's no secret that almost all modern electronics are manufactured in China, even if they are developed in the USA, Europe, Japan or Taiwan – the Chinese have not only learned how to do things efficiently, but have also grown such IT giants ...
Huawei NetEngine 8000 review: Exploring the features of SRv6
... simplifies the delivery of VPN traffic from the user to ... passed through several VLAN and VPN tunnels, now it is ... not require external sensors: router service cards can receive key ... data centers.
This compact router with a fixed configuration has ... routing, and everything about security settings and Firewall is meant ... the local discriminator of the static session BFD to 1. ... router, generating load from the LAN side
10-gigabit network switch ...
Tests show that the router fully utilizes the physical speed ...
Setting up protection against IT attacks in the enterprise using Zyxel equipment
A typical IoT attack looks like this: the device connects to a malicious Internet resource directly or through its own VPN, downloads and installs malicious code on itself, after which it begins to be either part of a large bot farm for attacks on third-party resources and use as a resident proxy, or simply spies on your network, trying to intercept anythat data, pull information from open resources or harm in any other way. It is not difficult to protect your network from possible IoT attacks. ...
Testing the features of the L3 PoE switch IP-Com G5328P-24-410w
This is a 28-port switch, in which 4 ports are gigabit optics for Uplink, and the remaining 24 ports are 1-gigabit RJ45 PoE with a total power budget of 370 watts, and each of these ports can work both in 802.3af mode (up to 15.4 watts) and and in the mode 802.at (up to 30 watts). When integrating into the project, some features of this switch should be taken into account.
Level 3 switches with PoE support are usually used to build enterprise Wi-Fi networks and video surveillance systems. And ...
Bulletin on IoT security. Is your network ready for Internet of Things exploits?
... long ago, the company Human Security
revealed (en)
an entire shadow ... almost all modern corporate network security gateways, including free software
pfSense ... two restrictions via VPN, PROXY or TOR: This stage consists in blocking ... of attacks and increase its security.
Blocking access by IP
Blocking ... of questionable addresses on the router: it is better to divide ... broadcast unwanted traffic to a secure IP address, for example, to ... Open api). On many corporate security gateways, this feature is active ...
Let's explore the features of Zyxel XMG1930-30HP, a switch with 2.5G/10G PoE ports and licensed L3 functions
...
DHCP Relay with Option82 support
Static Routing IPv4 / IPv6
Therefore, Zyxel ... . But, however, these are all rather exceptions, because the bulk of ... . Additional indicators signal that the switch is connected to the Nebula ... applications, cutting off, for example, VPN via UDP... oh yes, and ... younger L3 Zyxel switches.
Additional security features of L3 Access
The ... with additional built-in security features. The switch is able to deal ... really need all the additional security features, well, don't buy ...
