title=

The model range of Zyxel switches

... That is why choosing a Zyxel switch rarely comes down to a ... VLAN and PoE configuration, while remaining a virtually unmanaged switch. GS1200 ... of three PoE+ ports and two PoE++ ports: such a switch can ... L2 Up to 375 Watts, PoE+/PoE++ 1G SFP/Combo Functionality ... already been done with optics rather than twisted pair. For ... aggregation switch is able to directly power dozens of demanding PoE ... rail switch with 4 1G ports, 1 SFP port, 4 PoE+ ... 4×1G Web-managed 45W, PoE+ PoE Wall/pole, Outdoor, Nebula * - ...
 title=

Zyxel CX4800-56f review: 100G Switch with high redundancy

The Zyxel CX4800-56F is a high-density L3 aggregation optical switch in which the company pioneered the use of 100G ports: 8 QSFP28 100GbE uplinks complement 48 SFP+/SFP28 slots with 10/25gbe support, forming a single 56-port stack for traffic aggregation in campus and data centers factories. With a pass-through switching matrix of up to 4 Tbit/s and forwarding speeds of up to 2 billion packets per second, this switch confidently closes scenarios of highly loaded highways, where not only ...
 title=

Configuring Zabbix for monitoring access points and Keenetic routers

If your company uses Zabbix for infrastructure monitoring, you can integrate Keenetic routers and access points into this platform by following our instructions. This greatly facilitates network maintenance and incident investigation. In all cases when I came across the use of Keenetic in business, none of the owners set up means of active monitoring of these devices, even if there were two or three dozen access points. There can be many reasons for this, ranging from banal laziness and lack ...
 title=

Setting up Tailscale on the Zyxel USG Flex 500H gateway

... of 2.5Gigabit ports supports PoE+, for example, to power ... located behind a NAT (router or firewall) determine their ... access local resources behind the Zyxel gateway. The configuration is ... announced subnets. At this stage, we can already talk ... Zyxel gateway, effectively turning it into a full‑fledged VPN router ... is redirected through an additional router or VPN. This is ... the --advertise-routes (on the router device) and --accept‑routes ... You can check the Funnel status with the command: tailscale funnel ...
 title=

Zyxel WBE530 review: access point with 3 radio modules

The total bandwidth of the ZyXEL WBE530 is 10.8 GBps, but it is clear that it is achieved in ideal conditions when some customers "do not enter the wire", but exchange traffic via Wi-Fi. The access point has two 2.5 Gbit/s network interfaces, PoE power supply with up to 21 watts and 3 radio modules with 6 streams (2x2 for 2.4 GHz, 2x2 for 5 GHz and 2x2 for 6 GHz bands), channel widths of 160 and 320 MHz for 5 and 6 GHz bands are supported.> We continue to get acquainted with the ...
 title=

Exploring the features of the Zyxel XMG1915-18EP, a 2.5-Gigabit PoE switch with a basic L3

... number of ports, an average PoE budget by modern standards, but ... telecommunication cabinets. We have a rather interesting class of L3 switches ... Zabbix, Prometheus, etc. PoE and cooling features The Zyxel XMG1915-18EP has ... a PoE budget of 180 ... for the XMG1915-10E (without PoE), -10EP and -18EP models, ... priority, maximum power, and supported PoE standard for each of the ... replacement. Management features The Zyxel XMG1915-18EP switch can be controlled from ...
 title=

The differences between expensive Ethernet switches and cheap ones using the example of Zyxel

We will take two switches: the Taiwanese brand Zyxel and the Chinese counterpart from a little-known manufacturer and look at the design differences and what they affect in order to answer the question - does it make sense to overpay for design features? It's no secret that almost all modern electronics are manufactured in China, even if they are developed in the USA, Europe, Japan or Taiwan – the Chinese have not only learned how to do things efficiently, but have also grown such IT giants ...
 title=

Huawei NetEngine 8000 review: Exploring the features of SRv6

Let's talk about the advantages of IPv6-based segment routing technology, which displaces LDP tag allocation and network resource reservation protocols, RSVP on the example of a 10-gigabit router for small businesses and consider how FlexE technology helps to maintain a guaranteed bandwidth level for customers. . In recent years, more equipment for routing network traffic has been supplied under the Huawei brand than under other brands, and part of the merit of the company is that it was at ...
 title=

Setting up protection against IT attacks in the enterprise using Zyxel equipment

A typical IoT attack looks like this: the device connects to a malicious Internet resource directly or through its own VPN, downloads and installs malicious code on itself, after which it begins to be either part of a large bot farm for attacks on third-party resources and use as a resident proxy, or simply spies on your network, trying to intercept anythat data, pull information from open resources or harm in any other way. It is not difficult to protect your network from possible IoT attacks. ...
 title=

Testing the features of the L3 PoE switch IP-Com G5328P-24-410w

This is a 28-port switch, in which 4 ports are gigabit optics for Uplink, and the remaining 24 ports are 1-gigabit RJ45 PoE with a total power budget of 370 watts, and each of these ports can work both in 802.3af mode (up to 15.4 watts) and and in the mode 802.at (up to 30 watts). When integrating into the project, some features of this switch should be taken into account. Level 3 switches with PoE support are usually used to build enterprise Wi-Fi networks and video surveillance systems. And ...