The model range of Zyxel switches
Choosing a Zyxel switch rarely boils down to a simple "how many ports do I need?"&"- GS1100 and GS1900 from the same price category can radically differ in control functionality, and externally similar XGS1935 and XGS2220 will differ in routing and stacking class so much that they solve completely different infrastructure tasks. In this review, we will analyze the product line into three practical groups - SOHO and small office, medium and large business, as well as industrial and ...
The model range of Zyxel Wi-Fi 7 access points
The right access point today is chosen not by the maximum "speed on the box", but by a set of quite mundane parameters: how many bands are actually used, is there 6GHz, how many spatial streams does the radio frequency give, which uplink is on the wired side, is PoE supported, is there a second Ethernet port, can the device works as a bridge, whether it supports mesh, how exactly it can be controlled and in which case it is made. This is especially important for Zyxel, because the Wi‑ ...
Review of the Zyxel IAP500BE Secure Access Point
... boundaries of positioning: the Zyxel IAP500BE does not look like ... up to +65 °C, Zyxel considers the passive circuit sufficient ... roaming deserves special mention. Here, Zyxel uses the entire familiar 802 ... access points that may pose security risks or interfere with the ... of constant overload.
Conclusions
The Zyxel IAP500BE leaves a very solid ... wide channel and integration into Nebula centralized management. As a result ... a predictable, manageable and stable wireless network node for an industrial facility ...
Zyxel CX4800-56f review: 100G Switch with high redundancy
The Zyxel CX4800-56F is a high-density L3 aggregation optical switch in which the company pioneered the use of 100G ports: 8 QSFP28 100GbE uplinks complement 48 SFP+/SFP28 slots with 10/25gbe support, forming a single 56-port stack for traffic aggregation in campus and data centers factories. With a pass-through switching matrix of up to 4 Tbit/s and forwarding speeds of up to 2 billion packets per second, this switch confidently closes scenarios of highly loaded highways, where not only ...
Zyxel NWA50BE Review - Inexpensive 2.5G PoE model for Wi-Fi 7
... many countries where the security forces have chosen this ... talk about.
Configuring Zyxel Nebula
Configuring any Zyxel access points in the ... Nebula Control Center cloud ... use the control via the Nebula Control Center. The fact ... the USA region in the Nebula site configuration, then select ... on large objects. The Zyxel NWA50BE provides extensive information via ... the same level of security as in a busy ... devices on both wired and wireless network segments.
The disadvantages of ...
How to set up seamless roaming on Zyxel access points via Nebula Control Center
... and cloud service, as Zyxel did with Nebula Control Center.
Configuring Wi ... and support for the WPA3 security standard became mandatory. Both of ... specifically enabled due to increased security requirements, as this standard has ... uses a built-in more secure fast roaming mechanism, which replaces ... navigate between access points more securely, but with some limitations on ... -Fi segments or the entire wireless network hide behind a NAT with ...
Review of the Zyxel NWA210BE Access Point: Wi-Fi 7 model for high density spaces
The NWA210BE model is a model of the Wi-Fi 7 standard in the medium price range, it has 2 radio modules with formulas 2x2:2 for 2.4GHz and 4x4:4 for 5 and 6 GHz. The 5 and 6 Hz ranges are controlled by a single BandFlex radio module, so only one of them can operate at a time. The NWA210BE supports a channel width of 320 MHz, which allows for high point-to-point speeds, which may be in demand when building wireless bridges or connecting high-resolution NVR cameras.
The new Wi-Fi 7 standard ...
Using the features of dynamic VLAN and authentication on Zyxel switches
Following the recommendations of "best practice", network devices of various purposes, such as IoT, work computers, smartphones, guest devices, should always be located in different subnets, and ideally terminated through a common security gateway, however, in some cases, for example, when the gateway does not cope with the flow of traffic, distribution by subnets it can be assigned to a network switch to separate different devices by VLANs, thus separating access to different networks ...
Protecting the company's network with Zyxel USG Flex 100AX
... perimeter.
Zyxel USG Flex 100AX is an entry–level security gateway that ... the global Internet).
Zyxel has a very interesting Secure Wi-Fi feature ... features of the Zyxel USG Flex 100AX
The security gateway is assembled ... to do it on Zyxel.
Web surfing Security
The logic of restrictions ... I said, the Zyxel USG Flex 100AX security gateway uses two types ... , for example, control the wireless network via Nebula (the access point control mechanism ... that.
In terms of security, yes, the Zyxel USG Flex 100 is ...
Exploring the features of the Zyxel XMG1915-18EP, a 2.5-Gigabit PoE switch with a basic L3
We have a rather interesting class of L3 switches in front of us: multi-gigabit PoE models with a relatively small number of ports, an average PoE budget by modern standards, but 10-gigabit uplinks. They are interesting because the manufacturer has placed 2.5G PoE + 10G in a compact 9-inch rack housing with a silent fan, and such a switch can be installed at home, in a 1-room office, under a false ceiling or in narrow telecommunication cabinets.
We have a rather interesting class of L3 ...
