Zyxel CX4800-56f review: 100G Switch with high redundancy
The Zyxel CX4800-56F is a high-density L3 aggregation optical switch in which the company pioneered the use of 100G ports: 8 QSFP28 100GbE uplinks complement 48 SFP+/SFP28 slots with 10/25gbe support, forming a single 56-port stack for traffic aggregation in campus and data centers factories. With a pass-through switching matrix of up to 4 Tbit/s and forwarding speeds of up to 2 billion packets per second, this switch confidently closes scenarios of highly loaded highways, where not only ...
Setting up Tailscale on the Zyxel USG Flex 500H gateway
... of a new generation firewall, access point controller, and centralized security management ... both offline and through the Nebula cloud platform. Its hardware ... Tailscale account, but unlike traditional VPN networks, this is enough ... network gateway for the entire VPN session, while maintaining routing ... through an additional router or VPN. This is convenient when ... integrating Tailscale with existing corporate VPN solutions. To do this, ... You can check the Funnel status with the command:
tailscale funnel ...
Exploring the features of the Zyxel XMG1915-18EP, a 2.5-Gigabit PoE switch with a basic L3
We have a rather interesting class of L3 switches in front of us: multi-gigabit PoE models with a relatively small number of ports, an average PoE budget by modern standards, but 10-gigabit uplinks. They are interesting because the manufacturer has placed 2.5G PoE + 10G in a compact 9-inch rack housing with a silent fan, and such a switch can be installed at home, in a 1-room office, under a false ceiling or in narrow telecommunication cabinets.
We have a rather interesting class of L3 ...
The differences between expensive Ethernet switches and cheap ones using the example of Zyxel
We will take two switches: the Taiwanese brand Zyxel and the Chinese counterpart from a little-known manufacturer and look at the design differences and what they affect in order to answer the question - does it make sense to overpay for design features?
It's no secret that almost all modern electronics are manufactured in China, even if they are developed in the USA, Europe, Japan or Taiwan – the Chinese have not only learned how to do things efficiently, but have also grown such IT giants ...
Testing the features of the L3 PoE switch IP-Com G5328P-24-410w
... . In such installations, one switch combines both the access level ... to the specification, the switch has lightning protection up to ... checking the specification of the access point or camera and finding ... function.
Routing is supported both static and dynamic, a convenient ... devices such as gateway, switch and access point. When creating a project ... of the device, as Zyxel Nebula does, but simply is ... while you do not need VPN access to the network where ... not need to connect via VPN to the network where ...
Let's explore the features of Zyxel XMG1930-30HP, a switch with 2.5G/10G PoE ports and licensed L3 functions
...
DHCP Relay with Option82 support
Static Routing IPv4 / IPv6
Therefore, ... signal that the switch is connected to the Nebula Control Center cloud ... applications, cutting off, for example, VPN via UDP... oh yes, and ... reboot of the camera or access point, it is already difficult to ... is also possible to enable static Multicast redirection for VID and ... the Web interface.
Nebula Hybrid mode
Management via Nebula Control Center, let ... license.
When connected to Nebula, the switch switches to the so-called ...
Zyxel XGS2220-30HP - L3 Access switch for modern converged networks
This L3 layer switch has 4 x 10-Gigabit SFP+ slots, 1-Gigabit PoE+ ports for the main fleet of devices, NVR/VoIP optimized interface, support for Nebula cloud service and multi-Gigabit PoE+ ports for Wi-Fi 6 access points. That is, Zyxel has added a maximum of functions to make it the most versatile.
In the Zyxel hierarchy, the XGS2220 series refers to access switches, that is, to the lowest level that serves end devices and access points. We are used to the fact that cheap maintenance-free ...
We explore Zyxel Connect & Protect and answer the main questions: is it possible to do without a security gateway?
From the point of view of the network, a modern facility can be just one access point connected directly to the WAN from the provider, and there are enough resources on this access point to raise the VPN tunnel to the headquarters, and for NAT, and to configure restrictions for customers and for basic protection of customers and employees.
No, but really, why should an expensive security gateway be built on a small facility where the network infrastructure is completely wireless? Modern ...
Will Zyxel Nebula survive on the sovereign internet?
... ATP200 access gateway + PoE switch + access point configured via Nebula Control Center. The pfSense ... life were connected: the Internet, VPN, social networks and YouTube.
... direct control traffic to Nebula via a VPN, for example, in ... the internal network of your VPN connection, having previously configured ... for this purpose.
Will Nebula work via VPN?
Perhaps this is ... where a VPN gateway is configured, and all Nebula traffic is ... sites, a VPN is a salvation, because
! ! ! NEBULA WORKS VIA VPN ! ! !
at ...
Orchestration of wireless networks in Zyxel Nebula CC: configuring horizontal traffic protection and shaping
... filtering tools directly to the access point. All clients connected via ... switch (which we considered earlier
in the review
) and the WAX510D access point ... Nebula Pro licenses (entirely for the organization) and CNPC (for the access point ... be a direct channel via VPN to the headquarters (Secure ... can coexist on the same access point and work simultaneously.
The ... are not configured, the access point simply checks the availability of ... only one access point on some objects, abandoning the switch and router ...