The model range of Zyxel Wi-Fi 7 access points
The right access point today is chosen not by the maximum "speed on the box", but by a set of quite mundane parameters: how many bands are actually used, is there 6GHz, how many spatial streams does the radio frequency give, which uplink is on the wired side, is PoE supported, is there a second Ethernet port, can the device works as a bridge, whether it supports mesh, how exactly it can be controlled and in which case it is made. This is especially important for Zyxel, because the Wi‑ ...
Review of the Zyxel IAP500BE Secure Access Point
The Zyxel IAP500BE is a Wi‑Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore.
The Zyxel IAP500BE is a Wi-Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore.
...
Zyxel CX4800-56f review: 100G Switch with high redundancy
The Zyxel CX4800-56F is a high-density L3 aggregation optical switch in which the company pioneered the use of 100G ports: 8 QSFP28 100GbE uplinks complement 48 SFP+/SFP28 slots with 10/25gbe support, forming a single 56-port stack for traffic aggregation in campus and data centers factories. With a pass-through switching matrix of up to 4 Tbit/s and forwarding speeds of up to 2 billion packets per second, this switch confidently closes scenarios of highly loaded highways, where not only ...
Zyxel NWA50BE Review - Inexpensive 2.5G PoE model for Wi-Fi 7
... so Mesh networks are in high demand here, and Zyxel is ... , without these frills.
The Zyxel NWA50BE access point has one ... talk about.
Configuring Zyxel Nebula
Configuring any Zyxel access points in ... most important ones: the Zyxel NWA50BE web interface is easy ... which facilitates mass configuration on large objects. The Zyxel NWA50BE provides ... productive Mediatek MT7925 Wi-Fi controller and took measurements in ... network and with seamless roaming (see our
review of seamless roaming
), then this ...
How to set up seamless roaming on Zyxel access points via Nebula Control Center
... maintaining authentication.
Using a wireless controller allows you to automatically adjust ... and get fast, truly seamless roaming on ALMOST all 802.11ac ... the first route first and make the transfer between the stations ... In this scenario, when implementing seamless roaming, a situation will arise in ... network for the most comfortable seamless roaming. Now let's run ... testing, we used the
Zyxel NWA210BE
and
Zyxel WBE530
access points connected ... 7, switching is not exactly much slower. If the client moves ...
Review of the Zyxel NWA210BE Access Point: Wi-Fi 7 model for high density spaces
... 6 Hz ranges are controlled by a single BandFlex ... 6 Hz ranges are controlled by a single BandFlex ... mass integration at large facilities should not cause problems.
The Zyxel ... protection and shaping
How Zyxel Secureporter facilitates corporate network ... two aspects – how stable seamless roaming between access points is and ... Mediatek MT7925 Wi-Fi controller that was not the ... partition.
In order for seamless roaming to work truly " ... selected and, in fact, seamless roaming itself is enabled in the ...
Using the features of dynamic VLAN and authentication on Zyxel switches
Following the recommendations of "best practice", network devices of various purposes, such as IoT, work computers, smartphones, guest devices, should always be located in different subnets, and ideally terminated through a common security gateway, however, in some cases, for example, when the gateway does not cope with the flow of traffic, distribution by subnets it can be assigned to a network switch to separate different devices by VLANs, thus separating access to different networks ...
Protecting the company's network with Zyxel USG Flex 100AX
Zyxel USG Flex 100AX is an entry–level security gateway that is designed for installation in small offices and branches, in cases where the company has strict security requirements or there is a complex multi-rank network in which it would be nice to restrict employee access to various social networks and unnecessary resources and have an additional line of protection of the network perimeter.
Zyxel USG Flex 100AX is an entry–level security gateway that is designed for installation in small ...
Exploring the features of the Zyxel XMG1915-18EP, a 2.5-Gigabit PoE switch with a basic L3
We have a rather interesting class of L3 switches in front of us: multi-gigabit PoE models with a relatively small number of ports, an average PoE budget by modern standards, but 10-gigabit uplinks. They are interesting because the manufacturer has placed 2.5G PoE + 10G in a compact 9-inch rack housing with a silent fan, and such a switch can be installed at home, in a 1-room office, under a false ceiling or in narrow telecommunication cabinets.
We have a rather interesting class of L3 ...
The differences between expensive Ethernet switches and cheap ones using the example of Zyxel
We will take two switches: the Taiwanese brand Zyxel and the Chinese counterpart from a little-known manufacturer and look at the design differences and what they affect in order to answer the question - does it make sense to overpay for design features?
It's no secret that almost all modern electronics are manufactured in China, even if they are developed in the USA, Europe, Japan or Taiwan – the Chinese have not only learned how to do things efficiently, but have also grown such IT giants ...