title=

The model range of Zyxel switches

Choosing a Zyxel switch rarely boils down to a simple "how many ports do I need?"&"- GS1100 and GS1900 from the same price category can radically differ in control functionality, and externally similar XGS1935 and XGS2220 will differ in routing and stacking class so much that they solve completely different infrastructure tasks. In this review, we will analyze the product line into three practical groups - SOHO and small office, medium and large business, as well as industrial and ...
 title=

The model range of Zyxel Wi-Fi 7 access points

The right access point today is chosen not by the maximum "speed on the box", but by a set of quite mundane parameters: how many bands are actually used, is there 6GHz, how many spatial streams does the radio frequency give, which uplink is on the wired side, is PoE supported, is there a second Ethernet port, can the device works as a bridge, whether it supports mesh, how exactly it can be controlled and in which case it is made. This is especially important for Zyxel, because the Wi‑ ...
 title=

Review of the Zyxel IAP500BE Secure Access Point

The Zyxel IAP500BE is a Wi‑Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore. The Zyxel IAP500BE is a Wi-Fi 7 industrial access point that focuses not so much on a typical office scenario as on working in a technically complex environment where stability, fault tolerance, and predictable hardware behavior come to the fore. ...
 title=

Zyxel CX4800-56f review: 100G Switch with high redundancy

The Zyxel CX4800-56F is a high-density L3 aggregation optical switch in which the company pioneered the use of 100G ports: 8 QSFP28 100GbE uplinks complement 48 SFP+/SFP28 slots with 10/25gbe support, forming a single 56-port stack for traffic aggregation in campus and data centers factories. With a pass-through switching matrix of up to 4 Tbit/s and forwarding speeds of up to 2 billion packets per second, this switch confidently closes scenarios of highly loaded highways, where not only ...
 title=

Zyxel NWA50BE Review - Inexpensive 2.5G PoE model for Wi-Fi 7

... high demand here, and Zyxel is pleased to offer such ... , without these frills. The Zyxel NWA50BE access point has one ... slightly more than a regular Wi-Fi 6 access point.: 6.7 ... types of Smart antennas in Zyxel access points, and how ... Zyxel Nebula Configuring any Zyxel access points in the Nebula Control Center cloud ... most important ones: the Zyxel NWA50BE web interface is easy ... on large objects. The Zyxel NWA50BE provides extensive information via ... for users familiar with the Zyxel access point to configure ...
 title=

How to set up seamless roaming on Zyxel access points via Nebula Control Center

... to another office and cloud service, as Zyxel did with Nebula Control ... -Fi 5 and continuing with Wi-Fi 6 and Wi-Fi 7. The ... testing, we used the  Zyxel NWA210BE  and  Zyxel WBE530  access points connected ... , ms Wi-Fi 6 + 802.11k/v + 802.11r WPA2 30 60 Wi-Fi 6 + 802 ... to be slightly faster than Wi-Fi 6 + 802.11k/v/r configured ... ranges, you can expect that Zyxel access points with Wi-Fi ...
 title=

Review of the Zyxel NWA210BE Access Point: Wi-Fi 7 model for high density spaces

The NWA210BE model is a model of the Wi-Fi 7 standard in the medium price range, it has 2 radio modules with formulas 2x2:2 for 2.4GHz and 4x4:4 for 5 and 6 GHz. The 5 and 6 Hz ranges are controlled by a single BandFlex radio module, so only one of them can operate at a time. The NWA210BE supports a channel width of 320 MHz, which allows for high point-to-point speeds, which may be in demand when building wireless bridges or connecting high-resolution NVR cameras. The new Wi-Fi 7 standard ...
 title=

Using the features of dynamic VLAN and authentication on Zyxel switches

Following the recommendations of "best practice", network devices of various purposes, such as IoT, work computers, smartphones, guest devices, should always be located in different subnets, and ideally terminated through a common security gateway, however, in some cases, for example, when the gateway does not cope with the flow of traffic, distribution by subnets it can be assigned to a network switch to separate different devices by VLANs, thus separating access to different networks ...
 title=

Protecting the company's network with Zyxel USG Flex 100AX

... perimeter. Security gateway with Wi-Fi 6 on board This gateway is ... So I recommend using the Zyxel Nebula cloud controller for wireless networks ...  from the global Internet). Zyxel has a very interesting Secure ... implement a hybrid infrastructure with cloud services, Microsoft Azure and ... type of connection to the Zyxel Nebula cloud service – monitoring mode. ... of abandoning network centralization and cloud services in favor of ... market, with full support for cloud analysis, SSL bumpinging, reputation ...
 title=

Exploring the features of the Zyxel XMG1915-18EP, a 2.5-Gigabit PoE switch with a basic L3

... PoE and cooling features The Zyxel XMG1915-18EP has a PoE ... trivial: if in expensive switches Zyxel solders individual protection elements on ... and replacement. Management features The Zyxel XMG1915-18EP switch can be ... through the Nebula Control Center cloud system. There is no need ... is lowered ". All modern Zyxel switches are brought to a ... compare with older models from Zyxel (for example,  XMG19130 ), then yes ... function. For inexpensive construction of Wi-Fi 6 networks, especially in offices with ...